Galvanised Brick Reinforcement Mesh 175mm

The Galvanised Brick Reinforcement Mesh 175mm is a high-strength steel reinforcement strip designed to improve the structural performance of brickwork and blockwork. Manufactured from galvanised steel for corrosion resistance, this mesh is commonly used in single skin (half-brick) wall construction to control cracking and increase load distribution.

Product Features/Specifications:

At 175mm wide, this mesh is perfectly sized for use with standard half-brick walls. Produced from flattened steel wires, it features a welded mesh design that delivers excellent tensile strength while maintaining a slim profile for easy embedding within mortar joints. The galvanised finish ensures protection against rust in internal environments.

Detailed Product Benefits:

Brick reinforcement mesh significantly reduces the risk of cracking caused by thermal movement, settlement, or changes in loading. By tying multiple brick courses together, it improves the structural integrity of masonry walls and distributes stresses evenly.

The galvanised finish enhances durability, making it suitable for general building applications, while the lightweight rolls are easy to transport, cut, and handle on site. This mesh is an efficient, cost-effective way to reinforce brickwork without altering construction methods.

Applications and Versatility:

• Masonry panels requiring additional reinforcement
• Partition and boundary walls
• Reducing shrinkage and settlement cracks
• Areas around openings such as doors and windows
• General internal load-bearing and non-load-bearing walls
• For external or aggressive environments, stainless steel alternatives are recommended.

Features & Benefits List:

• 175mm wide
• Galvanised finish for corrosion resistance
• Welded mesh design provides high tensile strength
• Controls cracking caused by shrinkage and settlement
• Improves load distribution across brickwork
• Lightweight and easy to cut/handle
• Cost-effective reinforcement solution

Technical Specifications:

• Width: 1755mm
• Material: Mild steel wire
• Finish: Galvanised to BS EN 10346 standards
• Form: Welded mesh strip, supplied in rolls
• Typical Roll Length: 20m (varies by manufacturer)
• Application: Bed joint reinforcement for half-brick walls
• Standard Compliance: Typically meets BS 5628 for masonry reinforcement

Additional Information:

Mesh should be fully embedded within mortar with adequate cover to prevent exposure. Store in a dry environment before use to maintain galvanised protection. Stainless steel variants should be specified for external or high-moisture applications.

For more information please contact us on 01274 720227 or email us at [email protected]